DESMON

Italy's Comprehensive Professional Refrigeration Specialist; Authorised Dealer | Jacio Indicius

300+ Refrigerator & Freezer Models · Blast Chillers · Walk-In Cold Rooms · Scientific Storage; Nusco, Italy · Middleby Group

Professional refrigeration is a discipline where engineering precision matters in ways that are difficult to appreciate until it fails. A commercial refrigerator that cannot maintain its specified temperature under actual load conditions; the combined thermal mass of a fully stocked interior, the ambient heat gain through door openings during service, and the ambient temperature of a hot kitchen environment; is not a professional refrigerator. It is a machine that creates the appearance of compliance while systematically undermining the food safety programme it is supposed to support.

Desmon, headquartered in Nusco in the province of Avellino in southern Italy, is one of Europe’s most comprehensive manufacturers of professional refrigeration equipment; a company that has built its reputation on the engineering discipline of building refrigeration that performs as specified under real commercial kitchen operating conditions, not just under the controlled conditions of a test laboratory. With over 300 refrigerator and freezer models spanning commercial kitchens, food retail, healthcare, and scientific research, and with manufacturing facilities totalling 25,000 square metres, Desmon brings Italian engineering precision to refrigeration across a remarkably wide range of applications.

Desmon is part of the Middleby Corporation; one of the world’s most respected commercial foodservice equipment groups, whose portfolio includes brands like Rational (USA distribution), Kamado Joe, Welbilt’s cooking brands, and dozens of other specialist manufacturers. Middleby membership provides Desmon with access to global service and parts infrastructure, quality standards, and market reach that extends well beyond what an independent Italian manufacturer could achieve alone. ISO 9001 and ISO 14001 certified, with manufacturing plants declared environmentally friendly, Desmon’s quality credentials are independently verified rather than self-declared.

Jacio Indicius is an authorised Desmon partner across India, the Middle East, Gulf countries, the USA, and Asia; delivering Italian refrigeration engineering with full installation, commissioning, and service support.

Desmon; Brand Profile

Headquarters Nusco, Avellino, Italy
Manufacturing Two modern facilities; total area 25,000 square metres; full production cycle; moulding, fabrication, foaming, assembly, testing, packaging
Parent Group Middleby Corporation; one of the world’s leading commercial foodservice equipment groups
Product Range 300+ commercial refrigerator and freezer models; full range of blast chillers; walk-in cold room panels and systems; Desmon Scientific range for laboratory and healthcare
Certifications ISO 9001 quality management · ISO 14001 environmental management · ETL Sanitation (USA) · CE marking · Environmentally friendly production plants
Innovation Full in-house production cycle across all manufacturing stages; no outsourced component assembly
Scientific Division Desmon Scientific: 100+ models from +16°C to -87°C for laboratory, pharmaceutical, biomedical, and food science applications; Italy’s only manufacturer with a full production cycle in this category
Jacio Indicius Status Authorised partner; full supply, installation, commissioning, AMC, and genuine parts support
Markets India · Middle East · Gulf · USA · Asia

The Desmon Product Range; Over 300 Models for Every Refrigeration Requirement

Refrigerated Cabinets; Single to Multi-Temperature

Desmon’s refrigerated cabinet range covers the full spectrum of professional kitchen cold storage requirements; from the simplest single-door chiller for a small restaurant kitchen through to complex four-temperature cabinets that provide multiple temperature zones in a single footprint. The range includes solid-door and glass-door configurations, undercounter and full-height options, and specialist formats for pizza preparation, pastry display, and patisserie work.

Cabinet Type Models Temperature Application
Single-Door Upright Refrigerator GB Series (standard); GP Series (pizza prep top) 0°C to +8°C Restaurant and hotel kitchen cold storage; single-access primary refrigerator
Two-Door Upright Refrigerator GBD / GD2 Series 0°C to +8°C Higher-volume kitchen cold storage; dual-access for busy prep stations
Three-Door Upright Refrigerator GBT / GD3 Series 0°C to +8°C Large kitchen cold storage; hotel main kitchen; institutional kitchen refrigeration
Single-Door Upright Freezer GBF Series; GBF-15 ETL (for North America) −18°C to −22°C Restaurant and hotel kitchen frozen ingredient storage
Two-Door Upright Freezer GBFD Series −18°C to −22°C High-volume frozen storage; hotel kitchen; institutional catering
Four-Temperature Cabinet Multi-zone specialist models Multiple zones: +4°C / −4°C / −10°C / −18°C in a single unit Advanced cold storage for operations requiring multiple temperature categories simultaneously
Pizza Prep Refrigerator GPZ Series (e.g. GPZ166A) 0°C to +8°C; refrigerated top rail for pizza toppings Pizza station prep refrigerator; ingredients at temperature during pizza assembly service
Undercounter Refrigerator GB Series undercounter variants 0°C to +8°C Under-bench cold storage at cooking and prep stations; space-efficient kitchen integration
Patisserie / Display Refrigerator GPZ and glass-door variants 0°C to +8°C Front-of-house pastry and dessert display; refrigerated showcase for guest-facing service

Desmon Cabinet Construction Standards

All Desmon refrigerated cabinets share a consistent set of engineering standards that underpin their commercial performance: AISI 304 stainless steel exterior and interior construction (ETL Sanitation compliant); CFC-free cyclopentane foam insulation achieving higher insulation values than HFC-blown alternatives; environmentally friendly R452A or R290 refrigerants; sealed, self-lubricating evaporator fan motors; larger fan blades with low-velocity, high-volume airflow design for faster temperature recovery; self-closing hinged doors with magnetically sealed gaskets; and touch-screen or digital temperature controls depending on model specification.

Blast Chillers & Shock Freezers; HACCP-Compliant Rapid Temperature Reduction

Blast chilling is not optional in HACCP-compliant commercial kitchen operations; it is mandated by food safety regulations in the European Union, required by insurance and health authority inspectors across virtually every major market, and the single most effective technology available for extending the safe holding life of prepared food while preserving quality. Desmon’s blast chiller and shock freezer range addresses this requirement across the full capacity spectrum, from compact countertop units for small restaurants through to large-capacity floor-standing models for high-volume institutional operations.
Blast Chiller / Freezer Model Capacity Chill/Freeze Time Key Specifications
GBF-5 5-tray / 10 kg capacity +70°C to +3°C in 90 min (chill); +70°C to −18°C in 240 min (freeze) Compact countertop; AISI 304 SS; R452A refrigerant; touch-screen control
GBF-10 10-tray / 20 kg capacity As above; higher capacity Floor-standing compact; restaurant and hotel outlet kitchen
GBF-15 (incl. ETL version) 15-tray / 30 kg capacity Full HACCP cycle times Floor-standing; ETL Sanitation certified; HACCP logging; R452A
GBF-20 20-tray / 40 kg capacity Full HACCP cycle Medium-large restaurant and hotel kitchen
GBF-25 25-tray / 50 kg capacity Full HACCP cycle Large hotel / banqueting kitchen
GBF-40+ 40-tray+ / 80+ kg capacity Full HACCP cycle Central production kitchen; institutional operations

Walk-In Cold Rooms & Panel Systems

Desmon manufactures complete walk-in cold room systems; panels, doors, refrigeration units, and accessories; for commercial kitchen, food retail, and food production applications. As an Italian manufacturer with full in-house production capability, Desmon’s walk-in systems carry the same engineering consistency and quality control across panels, doors, and refrigeration components that their cabinet range delivers.

  • Walk-In Chiller Panels: modular polyurethane-insulated panels in standard and custom dimensions; food-safe interior lining; cam-lock jointing system for fast installation; multiple panel thickness options for different thermal performance requirements
  • Walk-In Freezer Panels: higher insulation specification than chiller panels; suitable for −18°C to −22°C sustained operation
  • Walk-In Cold Room Doors: Desmon-manufactured doors with high-compression seals; anti-condensation heated frame options; hinged and sliding formats
  • Walk-In Refrigeration Units: plug-in and remote condensing unit options; sized to the specific thermal load of each walk-in installation; compatible with natural refrigerants where project specification requires

Desmon Scientific; Laboratory and Healthcare Refrigeration

Desmon Scientific is the division of Desmon dedicated to laboratory, pharmaceutical, biomedical, and scientific research refrigeration; a product range that extends from standard +4°C pharmaceutical storage through to ultra-low temperature (ULT) freezers reaching −87°C. Desmon is the only Italian manufacturer that produces laboratory cold storage equipment with a full in-house production cycle; an unusual manufacturing capability that guarantees quality control across every production stage.
Scientific Product Temperature Range Capacity Application
DS-SM Series (1-door refrigerator) 2°C to 10°C 200–450 litres Pharmaceutical and medical sample storage; laboratory refrigerator
DS-FS Series (2-door refrigerator) 2°C to 10°C 300–600 litres Laboratory and clinical storage requiring larger capacity
DS-TGM3G / DS-TGM4 2°C to 10°C 441–602 litres Multi-compartment laboratory refrigeration
Laboratory Freezer Range -20°C to -40°C Multiple sizes Medical samples, reagents, plasma, blood products
Ultra-Low Temperature (ULT) Freezer -60°C to -87°C Multiple sizes Bio-banking; vaccine storage; long-term preservation
Refrigerated Workbenches +4°C to +16°C (worktop) Variable Lab prep benches with integrated refrigeration
Walk-In Laboratory Cold Rooms +16°C to -87°C Custom-built Pharmaceutical and biomedical cold storage installations

Desmon Across Commercial Kitchen and Scientific Segments

Application Segment Desmon Solution Primary Benefit
Restaurant Kitchen GB single/two-door chillers; GBF blast chiller; GPZ pizza prep Food safety compliance; HACCP blast chilling; pizza station prep refrigerator
Hotel Main Kitchen Multi-door GB cabinets; GBF-20 or GBF-25 blast chillers; walk-in cold rooms Volume refrigeration; HACCP documentation; full cold chain infrastructure
Institutional Catering GBF large-capacity blast chillers; walk-in panels; GD3 three-door cabinets Cook-chill compliance; food safety documentation; volume cold storage
Supermarket & Food Retail Glass-door display refrigerators; walk-in chillers and freezers Product display and accessibility; energy-efficient retail refrigeration
Patisserie & Bakery Glass-door GPZ patisserie cabinets; undercounter chillers Chilled pastry and dessert display; precise temperature for sensitive products
Pharmaceutical & Healthcare Desmon Scientific DS series; laboratory freezers; ULT units Validated pharmaceutical storage temperatures; healthcare compliance; sample integrity
Research & Biomedical ULT freezers (−87°C); walk-in cold rooms; refrigerated workbenches Ultra-low temperature capability; bio-banking; research compliance